Filter
Top Products
70 Philips Lighting Company SAG100 2008–2009
HALOGEN LAMPS
For the most current product information, go to the
e-catalog on www.philips.com
¥ Exclusive to Philips Lighting Company
$ Energy Saving Product
♦ Maximum Beam Candlepower
This Bulb Meets US Federal Minimum Efficiency Standards
† New since last printing
* Two Lamp Carded Pack.
‡ Quantity shown is minimum shipping container—
refer to Net Price Schedule for number of lamps to
qualify as a standard case.
(82) CAUTION: To avoid deterioration of lampholder by
heat, use only heat resistant lampholders or fixtures listed by
a nationally recognized electrical testing organization for use
with reflector or PAR lamps.
(86) PAR Halogen Caution Notice: Before using bulb, see
operating instructions on inside flap. Adherence to the operating
instructions will reduce the risk of personal injury or fire. The
filament capsule contained inside this glass bulb is pressurized,
operates at high temperature and could unexpectedly shatter.
Should the outer bulb break, particles of extremely hot glass
could be discharged into the fixture and/or the surrounding
environment, thereby creating a risk of personal injury or fire.
Operating Instructions: Before replacing, turn off power and
let lamp cool to avoid electrical shock or burn.
— For indoor or outdoor use. A weather-protected fixture is
recommended for wet locations.
— Suitable for use in open fixtures.
— Do not exceed the maximum wattage rating of the fixture.
— Do not use if outer glass is scratched or broken since it
may break during operation or removal.
— If outer glass breaks the lamp may continue to light,
however, immediately discontinue use.
— Due to the heat that radiates from the bulb, do not use
in close proximity to combustible materials or objects
susceptible to drying or fading.
— Manage in accord with disposal laws.
(91) CAUTION: Do not touch inner capsule with bare hands.
Fingerprints may result in shorter life. Remove fingerprints
with alcohol. THIS LAMP IS PRESSURIZED AND COULD
SHATTER so to avoid injury and to avoid exposure to
ultraviolet radiation, use only in fixtures that provide a
protective shield of tempered glass. Provide adequate ventilation
to ensure that seal temperature does not exceed 350°C and
use only in fixtures rated for the wattage stated on this
package. To avoid risks of burns or other injury, turn power off
and allow lamp to fully cool before attempting to replace.
Socket condition may affect lamp life. Inspect and replace
socket if deterioration has occurred.
(92) CAUTION:THIS LAMP IS PRESSURIZED AND
COULD SHATTER so to avoid injury and to avoid exposure
to ultraviolet radiation, this lamp should be used in a fixture
that provides a protective shield of tempered glass. Provide
adequate ventilation to ensure that seal temperature does not
exceed 350º C and use only in fixtures rated for the wattage
stated on this package. To avoid risks of burns or other injury,
turn power off and allow lamp to fully cool before attempting
to replace. Socket condition may affect lamp life. Inspect and
replace socket if deterioration has occurred.
(93) Rated average life is the length of operation (in hours)
at which point an average of 50% of the lamps will still be
operational and 50% will not.
(95) NOTICE: Do not touch bulb with bare hands. Fingerprints
may result in shorter life. Remove fingerprints with alcohol.
CAUTION: THIS LAMP IS PRESSURIZED AND COULD
SHATTER so to avoid injury and to avoid exposure to ultraviolet
radiation, use only in fixtures that provide a protective shield
of tempered glass. Provide adequate ventilation to ensure that seal
temperature does not exceed 350° C and use only in fixtures
rated for the wattage stated on this package. To avoid risks of
burns or other injury, turn power off and allow lamp to fully cool
before attempting to replace. Socket condition may affect lamp
life. Inspect and replace socket if deterioration has occurred.
(96) Operating Instructions: Do not use lamp in close proximity
to combustible materials. If used outdoors, use in an enclosed
fixture only. If used indoors, no additional shield is required.
Can be operated in all positions. CAUTION: Read operating
instructions before use. If outer glass breaks, turn power off
immediately and avoid touching any metal components. To
avoid potential burn and electrical shock during lamp
replacement, always turn power off and let lamp cool before
replacing bulb. Lasts 2 years based on 4 hours average usage
per day/7 days per week.
(97) Operating Instructions: Before replacing, turn off power
and let lamp cool to avoid electrical shock or burn. For indoor
use only. Do not allow hot bulb to come in contact with liquid
or metal parts of the fixture as glass may shatter. Do not
exceed the maximum wattage rating of the fixture. Do not
use if outer glass is scratched or broken since it may break
during operation or removal. If outer glass breaks the lamp
may continue to light, however, immediately discontinue use.
Due to the heat that radiates from the bulb, do not use in
close proximity to combustible materials or objects susceptible
to drying or fading. Manage in accord with disposal laws.
CAUTION: Adherence to the operating instructions will
reduce the risk of personal injury or fire. The filament capsule
contained inside this glass bulb is pressurized, operates at high
temperature and could unexpectedly shatter. Should the outer
bulb break, particles of extremely hot glass could be discharged
into the fixture and/or the surrounding environment, thereby
creating a risk of personal injury or fire.
(98) Note: This twistline has a GU10 base and may be used in
fixtures that have either GU10 or GZ10 sockets. Operating
Instructions: Do not use in close proximity to combustible
materials or objects adversely affected by drying or fading. Can
be operated in all positions. CAUTION: THIS LAMP IS
PRESSURIZEDAND COULD SHATTER so to avoid injury
and to avoid exposure to ultraviolet radiation, this lamp should
be used in a fixture that provides a protective shield of
tempered glass. If outer glass breaks, immediately discontinue
use. Always turn power off and let lamp cool before removal
to avoid potential burn or electric shock.
(99) WARNING: BULB OPERATES AT VERY HIGH
TEMPERATURES AND MUST BE USED PROPERLY TO
AVOID/REDUCE RISK OF FIRE. Do not use bulbs greater
than 300 watts in indoor residential fixtures. Use only in
fixtures specifying this bulb type and that meet revised UL
153 standard for tungsten-halogen torchiere lamps. Bulb is
pressurized and could shatter and should only be used in
fixtures that provide a protective shield of tempered glass. To
avoid exposure to ultraviolet radiation which could cause skin
and eye irritation use only in fixtures that provide a protective
shield of tempered glass. NOTICE: Do not touch bulb with
bare hands. Fingerprints may result in reduced performance
unless they are removed with alcohol. When operating, bulb is
hot. To avoid risks of burns or injury, turn power off and allow
bulb to cool before replacing. Socket conditions may affect
bulb life. Inspect and replace socket if deterioration has
occurred. Provide adequate ventilation to ensure that seal
temperature does not exceed 350°C.
TO AVOID/REDUCE RISK OF FIRE, DO NOT USE NEAR
COMBUSTIBLE MATERIALS.
(100) Product available Oct. 1, 2008
(101) Available for sale only in the state of CA
(102) Complies with CEC-140-2008-001, Part 1605.2 State
Standards for Federally Regulated Appliances, Table K-3.
For
more information go to www.energy.ca.gov/siting/title20/
.
(103) Complies with the Energy Independence and Security
Act of 2007 (Public Law 110-140). Section 321—Efficient
Light Bulbs.
(104) Complies with the Energy Independence and Security
Act of 2007 (Public Law 110-140), Section 322—Incandescent
Reflector Lamp Efficiency Standards.
Incandescent 20–51 Compact Fluorescent 71–86 Fluorescent 87–120Halogen 52–70