Filter
Top Products
Electrical andTechnical Data
RMS Lamp Operating Current (Amps) Nominal——————————— 1.5 (175W)
—
————————————————————————————— 2.1 (250W)
——————————————————————————————3.0 (360W)
————————————————————————————— 3.25 (400W)
————————————————————————————— 4.1 (1000W)
Lamp Current Crest Factor (Maximum)——————————————————1.8
Warm-up to 80% Full Brightness ———————————————— 3–5 minutes
Re-startTime for Hot Lamps —————————————————10–20 minutes
Physical Characteristics
BulbTemperature (Maximum)—————————————————400°C (752°F)
B
aseTemperature (Maximum)————————————————— 210°C (410°F)
Base —————————————————————————— EX39 Excl.Mog.
Operating Position ————————————————————— Base-up ± 15°
Luminaire ——————————————————————— Open or Enclosed
S
tandard Package Quantity—————————————————12 (175W,250W)
———————————————————————— 6 (360W,400W,1000W)
© 2007 Philips Lighting Company.All rights reserved.
Printed in USA 06/07
P-5562-B
www.philips.com
Philips Lighting Company
200 Franklin Square Drive
P.O.Box 6800
Somerset,NJ08875-6800
1-800-555-0050
ADivisionofPhilips ElectronicsNorthAmericaCorporation
Philips Lighting
281 Hillmount Road
Markham,Ontario
Canada L6C 2S3
1-800-555-0050
ADivisionofPhilips ElectronicsLtd.
Printedon chlorinefree paperfromSappi FinePapermills,whoareaccreditedwith EMASenvironmentalcertification.
Sappiclaims thatthe pulpused inthe manufactureof MagnoDull paperis derivedfrom environmentallycertified forests.
Philips Protected Metal Halide “O” Rated Lamps
Ordering Data
Rated
P
roduct Nom. ANSI
B
ulb
B
ulb MOL LCL Avg.Life Initial Mean
N
umber OrderingCode Watts Code Size Finish (In.) (In.) (Hrs.)
1
L
umens Lumens CRI CCT
2
8119-6 MP175/BU 175 M57/O ED-28 CLEAR 8
5
⁄1
6
5
10,000 15,000 12,000 65 3800K
2
8124-6 MP250/BU 250 M58/O ED-28 CLEAR 8
5
⁄1
6
5
10,000 22,000 16,500 62 3800K
13067-4 MP360/BU/EW 360 M165/M59/O ED-37 CLEAR 11
1
⁄2 7 20,000 34,200 23,940 65 4000K
13068-2 MP360/C/BU/EW 360 M165/M59/O ED-37 COATED 11
1
⁄2 — 20,000 31,700 20,605 68 3600K
13332-2 MP400/BU 400 M59/O ED-37 CLEAR 11
1
⁄2 7 20,000 38,000 26,600 65 4000K
1
3333-0 MP400/C/BU 400 M59/O ED-37 COATED 11
1
⁄2 —
20,000 34,500 22,425 67 3700K
2
8118-8 MP1000/BU 1000 M47/O BT-56 CLEAR 15
3
⁄8 9
.5 12,000 107,000 75,000 65 3900K
N
ickelplated brass base
1)Rated averagelifeis thelifeobtained,onthe average,fromlarge representativegroups oflampsin laboratorytests undercontrolledconditions at10or moreoperating hoursper start.Itis basedon survivalof atleast
50%of thelampsand allowsfor individuallamps orgroupsof lampsto varyconsiderablyfrom theaverage.Forlampswitha ratedaveragelife of24,000 hours,lifeisbased onsurvivalof 67%ofthe lamps.
2
)Approximatelumen valueslisted areforvertical operation ofthelamp.
3)Approximatelumen outputat 40%oflamp ratedaveragelife.
Abovespecificationssubject tochangewithout notice.
Protected Metal HalideLamps,Open orEnclosed Fixtures,Base UpOperation,
±
15º Unless Otherwise Noted
RecommendedWarnings,Cautions and Operating Instructions
R
“
WARNING:
Theselampscancauseseriousskinburnandeyeinflammationfromshortwave
ultravioletradiationifouterenvelopeofthelampis brokenorpunctured.Donotusewhere
peoplewill remainfor morethan afew minutes unlessadequate shieldingor othersafety
precautionsareused.Certainlampsthatwillautomaticallyextinguishwhentheouterenvelope
is broken orpunctured are commerciallyavailable.”This lamp complies with FDAradiation
performancestandard21CFRsubchapterJ.(USA:21CFR1040.30Canada:SOR/DORS/80-381)
If the outer bulb isbroken orpunctured,turn offat onceand replace thelamp
to avoidpossibleinjury fromhazardous short wave ultraviolet radiation.Donot
scratchtheouterbulborsubjectitto pressureasthiscouldcausetheouterbulb
to crackor shatter.A partial vacuumin theouterbulb maycauseglass tofly if
theenvelopeis struck.
WARNING:Thearc-tubeof metalhalidelamps aredesignedto operateunderhighpressure
andat temperatures upto 1000ºC andcan unexpectedlyrupturedue to internalor external
factors suchas aballastfailure ormisapplication.If thearc-tuberupturesfor any reason,the
outerbulbmaybreakandpiecesofextremelyhotglassmightbedischargedintothesurrounding
environment.Ifsucharuptureweretohappen,THEREISA RISKOFPERSONAL
INJURY,PROPERTYDAMAGE,BURNSANDFIRE.
These lampsare designed toretain all theglassparticlesshould anarc tube
rupture occur.Thefollowingoperatinginstructionsare recommendedto
minimizethese occurrences.
RELAMPFIXTURESATORBEFORETHE ENDOF RATEDLIFE.Allowing
lamps tooperateuntiltheyfail isnot advisedand mayincreasethe possibility
of innerarctube rupture.
CAUTION:TOREDUCETHE RISKOF PERSONALINJURY,PROPERTY DAMAGE,
BURNSAND FIRE RESULTING FROMANARC-TUBERUPTURETHE FOLLOWING
LAMPOPERATINGINSTRUCTIONS
MUSTBE FOLLOWED:
LAMPOPERATINGINSTRUCTIONS:
1.RELAMPFIXTURESATORBEFORETHEENDOFRATEDLIFE.Allowinglamps
tooperateuntiltheyfailisnotadvisedandmayincreasethepossibilityofinnerarctuberupture.
2.Beforelamp installation/replacement,shutpower offand allowlamp and fixture tocool
to avoidelectrical shock andpotentialburn hazards.
3.Useonlyauxiliary equipmentmeetingPhilips and/orANSIstandards.Use withinvoltage
limits recommended byballastmanufacturer.
A.Operate lamp only withinspecified limitsof operation.
B.Fortotalsupply loadrefer toballastmanufacturers electricaldata.
4.Periodicallyinspecttheouterenvelope.Replaceanylampsthatshowscratches,cracksordamage.
5.Ifa lamp bulbsupport isused,besure to insulatethe support electricallyto avoidpossible
decomposition ofthe bulb glass.
6.Protectlampbase,socketandwiringagainstmoisture,corrosiveatmospheresandexcessiveheat.
7.Time shouldbe allowed for lamps tostabilize incolor when turned onfor thefirst time.
Thismayrequireseveralhours ofoperation,with more thanone start.Lampcoloris also
subjectto change under conditionsof excess vibration orshock,andcolorappearance
may vary between individuallamps.
8.Lamps may require 10to 20minutesto re-lightif thereis apower interruption.
9.Takecare in handling and disposingof lamps.Ifan arctube isbroken,avoid skin contact
withanyof the contents orfragments.
10.Donot usethis lamp:
A.In afixture that contains aPulse Start metal halideballast.
B.In afixture thatis specificallydesigned for use withPulseStart metal halidelamps.
OperationoftheselampsonPulseStartMetalHalidesystemsmayincrease
thechanceofanouterbulbruptureandpiecesofextremelyhotglassmight
bedischargedintothesurroundingenvironment.Ifsucharupturewereto
happen,THEREISA RISKOFPERSONALINJURY,PROPERTYDAMAGE,
BURNSANDFIRE.
About Metal Halide Lamp Classifications
Every metal halide lamp is classified under one of the following three American National Standards Institute (ANSI) classifications:
E-Type are to be used in only suitably rated enclosed luminaries.
S-Type may be used in open luminaries,when operated in the near vertical position.This category of lamps is limited only to certain lamps in a 350 to 1000 watt range.
O-Type comply withANSI Standard C78.387 for containment test and may be used in open luminaries.
For more information on“Best Practices for Metal Halide Lighting Systems,”please visit www.nema.org and search for document number LSD 25-2000.