Philips PAR 20-E Work Light User Manual


  Open as PDF
of 2
 
MAINS
VO LTAGE
RANGE
notes
1) The lamp is not suitable for dimming or for use on electronic switches.
2) To prevent overheating of the electronic circuit inside, the case temperature Tc (see drawing) shall not exceed 110 °C at nominal
supply voltage. Under normal operating conditions this situation will not occur.
3) The product complies with following standards. Safety: IEC 968; EMC:EN 55015, EN 61000-3-2 and EN 55022; EMI: EN 61547.
technical and lighting data
MasterPAR 20, 25 DGR (Flood)
MasterPAR 20, 10 DGR (Spot)
Type Average Maximum Beam Colour Input Power Nett EANcode Ordering number EOC
lamp life luminous angle temperature power factor weight 8711500
intensity
h cd deg K W g 12 units
SPOT
PAR 20-E 230V 20W 10DGR E27 5000 7000 10 3000 21 >0.95 110 425973 9247 802 44200 413109
PAR 20-E 240V 20W 10DGR E27 5000 7000 10 3000 21 >0.95 110 412409 9247 802 45500 412393
FLOOD
PAR 20-E 230V 20W 25DGR E27 5000 1200 25 3000 21 >0.95 110 425959 9247 803 44200 413086
PAR 20-E 240V 20W 25DGR E27 5000 1200 25 3000 21 >0.95 110 412386 9247 803 45500 412379
PAR 20-E
REFLECTOR
 previous