Filter
Top Products
DISCUS™ DRG A225G
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
21
WIRELESS
The gateway can be quickly configured as a wireless access point by setting the
service set identifier (SSID) and channel number. It also supports encryption
and client filtering.
Channel and SSID
This page allows you to define the SSID and the Channel ID for wireless con-
nection. These parameters are used for the mobile stations to connect to this
access point. You must specify a common radio channel and SSID (Service Set
ID) to be used by the Router and all of its wireless clients. Be sure you config-
ure all of its clients to the same values
Table 2 Channel and SSID Parameters Table
Parameter Description
SSID Service Set ID. The SSID must be the same on the
VoIP Router and all of its wireless clients.
SSID Broadcast Enable or disable the broadcasting of the SSID.
Disabling SSID broadcast will provide increased
security by hiding the SSID of your wireless net-
work.
Wireless Mode
This device supports both 11g and 11b wireless
networks. Make your selection depending on the
type of wireless network that you have. You may
use “Mixed (11b+11g)” to provide compatibility with
both 11b and 11g wireless clients.
Channel
The radio channel used by the wireless router and
its clients to communicate with each other. This
channel must be the same on the VoIP Router and
all of its wireless clients.The VoIP Router will
automatically assign itself a radio channel, or you
may select one manually.