Filter
Top Products
7
4. REVERSING SWITCH – The reversing switch is located as indicated in
Fig. 3. These models will operate in either the forward direction (clockwise
rotation) for drilling holes, or the reverse direction (counterclockwise rotation)
for releasing jammed drill bits. For counterclockwise rotation, stop the motor
by releasing the trigger switch and push the reversing switch toward the right
side of the drill, or in the opposite direction for clockwise rotation.
NOTE: Never attempt to change direction of rotation while switch is
ON. To do so, may damage interlock feature built into switch. Be sure
switch is OFF and motor has completely stopped before changing
direction of rotation.
5. VARIABLE SPEED – As the trigger switch is squeezed, the drill speed
Increases.
HOW TO HOLD THE DRILL
WARNING: The front end of drill may be made live if the tool drills into
live wiring in a wall. TO PREVENT ACCIDENTAL ELECTRICAL
SHOCK, DRILL MUST BE HELD AS SHOWN IN FIG. 4. APPLY
FORWARD FORCE ON THE PISTOL GRIP HANDLE ONLY, AND
ONLY WITH YOUR HANDS.
An auxiliary handle is supplied with some models. The auxiliary handle should
be used on those models during all drilling operations: grasp auxiliary handle
with one hand to resist rotational force ONLY.
REVERSING
SWITCH
LOCK
BUTTON
TRIGGER
SWITCH
Fig. 3
MODELS 2620, 2621
MODELS 6614, 6615
Fig. 4
901013 - 12-31-01.qxd 2/11/02 3:01 PM Page 7