Porter-Cable 4113 Saw User Manual


 
8
9. Fig. 11 shows both the left and right corner of a drawer fitted together after they were both routed from the left
end of the templet. Note the location of partial pins on drawer sides.
10. If for appearance reasons the partial pins are desired to be in the same location of both sides of the drawer as
shown in Fig. 12, then rout the right end of the drawer front and right side of the drawer on the right end of the
templet. Adjust the edge guide the same as those on the left (mirror image).
Fig. 11
Partial Pin
Left Side
of Drawer
(Pin Board)
Right Side
of Drawer
(Pin Board)
Front of Drawer
(Tail Board)
Partial Pin
Fig. 12
Partial Pin
Left Side
of Drawer
(Pin Board)
Right Side
of Drawer
(Pin Board)
Front of Drawer
(Tail Board)
Fig. 10
Drawer Front
Left Side
of Drawer
INSIDE
INSIDE