3- ENG
D25799
SPECIFICATIONS
Air Inlet 1/4 NPS
Maximum Air Pressure 60 psi.
Recommended Operating Air Pressure 35 psi.
Cup 133 cc (4.5 oz)
Air Consumption @ 60 PSI 3.6 SCFM
Prolonged exposure to air spray can result in per-
manent damage to hearing.
Always wear hearing protection when operating
spray equipment.
Spray guns operate at pressures and velocities
high enough to penetrate human and animal flesh,
which could result in amputation or other serious
injury.
! See a physician immediately!
Never place hands in front of nozzle.
Direct spray away from self and others.
HAZARD
WHAT COULD HAPPEN HOW TO PREVENT IT
Risk of flying objects
HAZARD
WHAT COULD HAPPEN HOW TO PREVENT IT
Risk of injection
Certain parts are under pressure whenever the gun
is connected to a pressurized air line. These parts
may be propelled if the gun is disassembled.
Disconnect the gun from the air line, or completely
depressurize the air line whenever the gun is to be
disassembled.
Compressed air may propel dirt, metal shavings,
etc. and possibly cause an injury.
Never point any nozzle or sprayer toward a person
or part of the body.
Always wear ANSI 278.1 safety approved goggles
or glasses when spraying.
Before disassembly or removal of any part of gun or attached
components, shut off compressor, release pressure by depressing
trigger, and disconnect power source.
NEVER assume system pressure is zero!
TO AVOID CREATING AN EXPLOSIVE ATMOSPHERE, WORK ONLY
IN WELL VENTILATED AREAS.
USE OF A FACE MASK IS RECOMMENDED TO PREVENT INHALA-
TION OF TOXIC MATERIAL.
GENERAL INFORMATION