Filter
Top Products
8
6. Close magazine cover, close and latch feeder cover (see Fig. 23).
7. Adjust directional exhaust deflector (A) Fig. 24, so that the exhaust air
blast will be directed away from the operator. The exhaust deflector provides
seven detented positions for directing the exhaust blast away from the
operator. Grasp the deflector and rotate it to the desired position for the
current application. Note: Non-skid pads (B) Fig. 24 help keep the tool from
sliding off the roof.
8. Adjust shingle guide (C) Fig. 25, by loosening the retaining screw (D) and
sliding the shingle guide to desired position. Tighten retaining screw firmly.
The shingle guide can be used as an aid in positioning the shingle to be
nailed a specific distance (D) Fig. 26 from the front edge of the previous row
of shingles (R) as shown.
Fig. 22
A
C
D
A
Fig. 24
B
Fig. 23
B
Fig. 25
D
Fig. 26
R
904461 - 09-04-02.qxd 9/23/02 8:24 AM Page 8