Filter
Top Products
10
Figure 2
(items not to scale)
7.0 Setup and assembly
7.1 Shipping contents
(See Figure 2)
Qty.
A Lamps ...................................................... 2
B Spur center .............................................. 1
C Live center with pin ................................ 1
D Leveling foot ............................................ 4
E Comparator spur center ......................... 1
F Comparator dead center ........................ 1
G Vacuum chuck......................................... 1
H Air blow gun with hose............................ 1
I Vacuum adaptor support bracket .......... 1
J V ac uum adap to r ...................................... 1
K Knock-out rod ......................................... 1
L Combination wrench, 19mm .................. 1
M Face plate wrench................................... 1
N Comparator bracket ................................1
O Guard bracket ..........................................1
P 14” Tool rest ............................................1
Q Tool caddy ...............................................1
R Guard .......................................................1
S Legs .........................................................2
T Face Plate................................................1
U Lamp holder set.......................................1
V Lathe bed with Headstock/Tailstock/
Toolrest Base/Remote switch ................1
Hardware Package (p/n 4224B-HP):
HP-1 Socket head cap screw, 3/8x1-1/4 .... 2
HP-2 Socket head cap screw 3/8x1-1/2 ... 10
HP-3 Lock washer 3/8.................................12
HP-4 Flat washer 3/8 ..................................10
HP-5 Socket head cap screw 1/2x1............ 2
HP-6 Lock washer 1/2...................................2