Filter
Top Products
®
FEATURES
Digital readout allows the user to see the exact RPM that the spindle is turning at for more accurate adjustments and fine tuning
Redesigned headstock allows for better chisel angles when turning the back side of a bowl against the headstock
Redesigned tool rest geometry allows for better chisel movement along the tool rest
Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not mar or damage any of the
drive centers
Tool caddy mounts directly to the lathe which allows the user to store all the necessary tools right under the headstock
Tailstock storage keeps a chip free area to store other often used accessories
Model 3520B
Stock Number 1352001
Distance Between Centers (in.) 34-1/2
Swing Over Bed (in.) 20
Overall Length (in.) 50
Spindle Speeds 0-1200 / 0-3200 RPM
Motor 2HP, 220V
Lathe Power Requirements 220V, 3PH or 1PH
Spindle Thread Size 1-1/4” x 8 T.P.I.
Head/Tailstock Taper #2 Morse
Height 44” (Adjustable)
Weight 650 lbs
Tailstock Quill Travel (in.) Over 4
3” Faceplate standard
14” Toolrest standard
Drive System Poly V Belt, Inverter Drive
Spindle Lock standard
Knock Out Rod, Brass Tipped standard
Drive Center standard
Multiple Ball Bearing Line Center standard
Hole through Tail Stock Spindle (in.) 3/8
Hole through Head Stock Spindle (in.) 5/8
Footprint of stand (in.) 50L x 24W