Filter
Top Products
WMH TOOL GROUP, Inc.
LaVergne, TN USA
www.wmhtoolgroup.com
1-800-248-0144
The Gold Standard Since 1921.™
®
FEATURE BENEFIT
2HP, 1Ph motor
3HP, 3Ph motor
Capacity to handle the largest work and plenty of power for the
most demanding jobs
Large 8" x 82" table surface Maximum support for accuracy and fine finish
1/8" depth of cut limiter control knob Allows for quick adjustment and safely sets maximum depth of
cut at 1/8"
Hand wheel fence tilting Precision control of angle adjustments
No mar fence insert Keeps fence from scratching table surface while performing
adjustments
Model PJ882
Stock Number (2HP, 1Ph, 230V)/(3HP, 3Ph, 230V) 1610079/1610080
Cutting capacity (W x D/in.) 8 x 1/2
Cutterhead speed (RPM) 7,000
Cuts per minute 21,000
Cutterhead diameter (in.) 3-1/16
Number of knives 3
Rabbeting capacity (in.) 1/2
Table surface (W x L/in.) 8 x 82
Infeed/outfeed table length (in.) 44/38
Table height (in.) 31-5/16
Fence (H x L/in.) 4-3/4 x 38-3/16
Knife size (L x W x T/in.) 8 x 11/16 x 1/8
Fence tilts in and out (degrees) 45
Positive stops (degrees) +/-45, 90
Dust collection port diameter (in.) 4
Minimum CFM requirements 800
Motor 3HP, 2Ph, 230/460V or 2HP, 1Ph, 230V
Shipping/Net Weight (lbs.) 850/616
The new 8" Parallelogram Jointer offers performance and
value in a machine loaded with features like an extra long
82" bed length for better work support, innovative fence
design that allows you to turn a handwheel that tilts the
fence in and out with positive stops at +/- 45 and 90º. A
non-mar insert in the fence contacts the table to avoid
scratching the surface during adjustments. The parallelo-
gram design keeps the table in close proximity to the
cutterhead for improved finish and allows for a fast
depth of cut adjustment. This design also insures the table
remain perfectly parallel even after years of tough duty. The
1/8" depth limiter control knob gives you quick adjustment
ability and safety. A quick twist of the knob will disable this
feature. This jointer features Powermatic controlled chip
3 knife cutterhead for a safe, smooth cut every time. The
powerful 3HP motor is totally enclosed in a heavily construct-
ed steel stand providing plenty of power for even the most
demanding jobs.
PJ882 8" Parallelogram Jointer
STOCK NO. 900352
Printed in the U.S.A.
© WMH TOOL GROUP, Inc.
All rights reserved.