Filter
Top Products
84 powermatic.com
719T TILT TABLE MORTISER
The 719T Tilt Table Mortiser features heavy-duty cast iron construction and a powerful 1HP
motor for the most demanding jobs. The head is mounted using adjustable gibs to assure
years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-
loaded six position adjustable handle for movement. A handy depth stop gives a uniform
depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to
any angle between 0 and 35°. The table can also move left to right and forward and back
on dovetail ways with the large handwheel controls. Adjustable linear stops and ip down
stop allow for precision repeatability. The quick adjust clamp provides plenty of work-
holding force and will swivel to accommodate angled workpiece. The heavy enclosed
steel cabinet provides plenty of storage inside for chisels and accessories.
OPTIONAL ACCESSORIES
Chisel & bit 1/4" 6285526
Chisel & bit 5/16" 6285527
Chisel & bit 3/8" 6285528
Chisel & bit 1/2" 6285529
1/2" chuck with key 6294245
Drill bushing 1-1/8" 6294198
Drill adapter shaft 6294210
Drill bushing 3/4" 6294221
Drill bushing 5/8" 6294222
Chuck extension adapter 6294232
SPECIFICATIONS
Model Number 719T
Stock Number 1791264K
Spindle Speed (RPM) 1725
Table tilt (deg.) 0 to 35
Chisel Capacity (in.) 1/4 - 1
Chuck Capacity (in.) 1/2
Chisel Shank Capacity (in.) 5/8 I.D. / 3/4 I.D. / 1-1/8 I.D.
Chisel Stroke, Maximum (in.) 10-3/4
Head Stroke , Maximum (in) 6
Longitudinal table travel (in) 15-1/2
Cross table travel (in) 4
Chisel Center to Fence (in.) 4
Table Size (in.) 7 x 20-1/4
Fence Size (in.) 4-1/2 x 20-1/4
Base Size (in.) 14 x 16
Bushing Size (in.) 5/8, 3/4, 1-1/8
Overall Height on Base (in.) 60
Overall Dimensions (L x W x H/in.) 21-1/4 x 21-5/8 x 74
Motor (TEFC) 1HP, 1Ph, 115/230V, Prewired 115V
Net Weight (lbs.) 276
Shipping Weight (lbs.) 292
FEATURES
1HP TEFC motor
Work stop for repeat cuts
Depth and length stops
Enclosed stand with shelf
Drill bit adapter
Quick-release vise for speedy release of work material
Chuck extension adapter
5
Y E A R
WARRANTY
STANDARD EQUIPMENT
Chisel and tool holder with sharpening stone
1/2" drill chuck with 4" chuck key
Removeable safety switch key
08DrillingMortising 10/24/06, 8:01 AM84