Powermatic PM3000 Saw User Manual


 
The large 12 ¾”-long by 2 ¾”-tall extruded fence can be positioned closer to or farther from the
blade by releasing the two finger-operated levers. This allows setting the miter fence at the
optimum distance from the blade at all cutting angles for maximum accuracy and safety.
Slots in the face and top edge of the miter gauge fence accept hex head fasteners to make
attaching your custom auxiliary faces or shop-made jigs easy and very secure.
Accessories
Throat Inserts
Zero-clearance and dado inserts (left)
are available as options. Note that the
zero-clearance insert is pre-cut for the
splitter assembly. The user simply cuts
the blade slot before use.
In addition to the standard throat insert shipped with the
POWERMATIC PM3000, we offer a composite zero clearance
insert (#1791080) and a metal dado insert (#1791081). The
dado insert is sized to accept up to 12”-diameter multi-plate
stacked dado sets at their full 13/16” width.
Like the standard insert, the dado version also features the
spring-loaded balls that keep it snug in the opening. The zero
clearance insert has adjuster screws that allow you to fine-tune
its fit in the opening.
The standard and zero clearance inserts are slotted for use with the splitter and guard assembly
installed.