Filter
Top Products
7–Removal and Replacement
iSR6200 Chassis Blades
7-8 ISR651101-00 G
2. Insert the new blade into the chassis slot. Figure 7-8 shows how to push the
blade straight into the chassis (1), seat the blade onto the chassis mid-plane
by pushing the right side lever up, and then latching it into place (2). The
blade powers on and boots up.
Figure 7-8. Inserting the New Blade into the Chassis Slot
3. Wait until the blade finishes booting up.
The system runs the POST. The heartbeat and system fault LEDs show the
operational status of the router. When the POST completes with no errors,
these LEDs blink at a steady rate of once per second.
4. Connect to the blade’s Ethernet management interface to your computer.
5. Open a command line, change to the directory that contains your FRU file,
and then enter ftp 10.0.0.1. For both the user name and password, use
ftp. Remember to enter the bin command before you enter the put
command. For example:
(1)
(2)