Filter
Top Products
ii ISR651101-00 G
iSR6200 Intelligent Storage Router
Installation Guide
Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no
responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its
use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications
described in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no
representation nor warranty that such applications are suitable for the specified use without further testing or
modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.
Document Revision History
Revision A, March 20, 2009
Revision B, May 24, 2009
Revision C, November 30, 2009
Revision D, May 14, 2010
Revision E, October 29, 2010
Revision F, November 8, 2010
Revision G, September 28, 2011
Changes Sections Affected
Updated to latest QLogic template, including new
cover and back graphics.
All
Updated the Tech Support section’s introduction,
training, and contact information text.
“Technical Support” on page xviii
Added caution about SFP installation. “Installing the Transceivers” on page 3-6
Added download instructions for the SANsurfer
Router Manager utility.
“Downloading the SANsurfer Router Manager
Installer” on page 3-11
Updated the SANsurfer Router Manager installa-
tion instructions for Windows, Linux, and Mac OS.
“Windows Installation” on page 3-13
“Linux Installation” on page 3-13
“Mac OS X Installation” on page 3-13
Updated the procedure for starting SANsurfer on a
Windows system.
“Starting SANsurfer Router Manager” on
page 3-14
Removed the references to the obsolete General
Configuration Wizard and added a reference to
using the iSR6200 Router Manager User’s Guide
for information on configuring router ports.
“Configuring the Router” on page 3-14
Updated the link to the firmware Downloads page
on QLogic.com and enhanced the firmware down-
load procedure.
“Installing New Firmware” on page 3-15
Updated the menu from which the FW Update Wiz-
ard is accessed (was the Wizards menu; now is
the File menu) in SANsurfer Router Manager.
“Using SANsurfer Router Manager to Install Firm-
ware” on page 3-16