Q-Logic ISR6200 Router User Manual


 
C–Log Messages
C-22 ISR651101-00 G
119089 #%d: QLIsrEventHandler: LIP reset
occurred (%x): mailbox1 = %x
FC Info Fibre Channel LIP reset occurred. The LIP reset type
is reported, as is the contents of the Fibre Channel
processor’s mailbox 1 register.
119090 #%d: QLIsrEventHandler: Link up (%x)
mailbox1 = %x
FC Info Fibre Channel link up occurred. Event status is
reported, as is the contents of the Fibre Channel pro-
cessor’s mailbox 1 register.
119092 #%d: QLIsrEventHandler: Link mode up (%x):
RunTimeMode=%x
FC Info Fibre Channel link up occurred. Event status is
reported, as is the RunTimeMode (0 = loop, 1 =
point-to-point).
119093 #%d: QLIsrEventHandler: RSCN update (%x)
rscnInfo: %x
FC Info An RSCN was received. Event status is reported, as
is the RSCN information.
119097 #%d: QLIsrEventHandler: Port update (%x)
mb1-3 %x %x %x
FC Info Fibre Channel port update. Event status is reported,
as is the contents of the Fibre Channel processor’s
mailbox 1, 2, and 3 registers.
119144 #%d: QLTimer: VP %d discover a reject
device PID %02x%02x%02x
FC Info A virtual port logged into a device, but the device
rejects the login.
120278 #%d: QLFlashGetNvram: Invalid Serial Link
Control 0x%x for port %d
FC Info Update NVRAM for the invalid Serial Link Control for
mezzanine platform.
120373 #%d: QLIsrEventHandler: DCBX Completed
(%x)
FC Info For FCoE protocol, the data center bridging
exchange (DCBX) protocol completes.
120374 #%d: QLIsrEventHandler: IDC Completion
(%x) %x, %x, %x, %x, %x, %x, %x
FC Info For FCoE protocol, the inter-driver communications
(IDC) completes.
Table C-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description