Filter
Top Products
4–Configuration
Connecting iSCSI Hosts to the iSR6200
ISR651101-00 G 4-17
The following example shows the anatomy of a sample IQN string from an
iSR6200 router:
iqn.2004-08.com.qlogic:iSR6200.0834e00019.b1.01.20030020c2075970
1. Vendor name and registration date
2. Product Name
3. iSR6200 Chassis Serial Number
4. Blade (b1 or b2)
5. VPGroup (01 through 04)
6. Fibre Channel target WWPN
Notice that the IQN string does not contain any information about which iSR6200
physical iSCSI port to which you are connecting. iSCSI load balancing and
failover are handled by the iSCSI host and not on the iSR6200.
Also notice that the IQN string does not contain any information about which
physical Fibre Channel port on the iSR6200 through which the Fibre Channel
target device is attached.
You can view the complete list of IQN strings that your iSR6200 is presenting with
the show presented_targets command in the CLI. For example:
iSR6200 <1> (admin) #> show presented_targets
Presented Target Information
------------------------------
iSCSI Presented Targets
-------------------------
Name iqn.2004-08.com.qlogic:iSR6200.0834e00019.r1.00.20030020c2075970
Alias
<MAPS TO>
WWNN 10:00:00:20:c2:07:59:70
WWPN 20:03:00:20:c2:07:59:70
Name iqn.2004-08.com.qlogic:iSR6200.0834e00019.r1.00.21040020c2075970
Alias
<MAPS TO>
WWNN 10:00:00:20:c2:07:59:70
WWPN 21:04:00:20:c2:07:59:70
1
2 3
4
5
6