Q-Logic ISR6200 Router User Manual


 
C–Log Messages
C-20 ISR651101-00 G
106851 #%d: QLTimer: Heartbeat failed FC Error The Fibre Channel controller failed to provide a
heartbeat.
106853 #%d: QLTimer: Link error count (0x%x)
exceeded, link down
FC Error The driver has determined that the Fibre Channel link
is unreliable and unusable due to the number of
errors encountered. The link has been taken down.
106912 #%d: QLReserveLoopId: out of loop Ids FC Error The Fibre Channel processor was unable to obtain
the number of loop IDs required. This failure occurs
only when the Fibre Channel processor is running
multi-ID firmware.
106928 #%d: QLMarkDeviceOffline: Device Id: %x
marked offline, cLinkDownTimeout = %x,
cPortDownRetryCount=%x
FC Error The driver was unable to re-establish connection to
the target within the timeout and retry counts, and is
therefore marking it offline.
106948 #%d: QLSnsGetAllNext: Name server login
FAILED %x
FC Error The Fibre Channel processor is unable to log into the
Fibre Channel fabric name server.
107029 #%d: QLUpdateDeviceData: out of slots in
host database
FC Error The driver’s host (initiator) database is full.
107030 #%d: QLUpdateDeviceData: out of slots in
target database
FC Error The driver’s target database is full.
107041 #%d: QLUpdateDeviceDatabase 0x%x: GET_ID
failed %x
FC Error The driver’s host (initiator) database is full. Maximum
host database is 64.
107056 #%d: QLUpdateDeviceDatabase 0x%x: out of
slots in host database
FC Error The drivers host (initiator) database is full.
Table C-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description