Filter
Top Products
5–Fibre Channel over IP
Configuring FCIP
ISR651101-00 G 5-13
To verify the listen port number, run the following command (from a Linux system),
where the IP address specified is that of the remote router’s management port:
rpcinfo -p <IP address>
Look for the following program numbers:
The output of the rpcinfo command should be similar to the following. The
numbers in the Port # column (714, 835, and 896 in these examples) are the
port number(s) that you need to unblock.
Program # Port #
--------- ------
351517 1 udp 714
351517 1 tcp 714
351516 1 udp 714
351516 1 tcp 714
351514 1 udp 835
351514 1 tcp 835
351515 1 udp 896
351515 1 tcp 896
Table 5-3. Ports Requiring Unblocking
Port Protocol Description
20 TCP FTP—data
21 TCP FTP—control (command)
23 TCP Telnet protocol—unencrypted text communications
111 TCP, UDP Sun remote procedure call (RPC)
161 TCP, UDP SNMP
835 TCP, UDP Port number on which the server listens for user
requests
Router Program Number
iSR6142 351514
iSR6200 351515
351516
351517