Filter
Top Products
4–Configuration
Enabling Virtual Port Groups
4-6 ISR651101-00 G
Index 2
VpGroup Name VPGROUP_2
Status Enabled
WWPNs 21:01:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f9
Index 3
VpGroup Name VPGROUP_3
Status Enabled
WWPNs 21:02:00:c0:dd:13:16:f8
21:02:00:c0:dd:13:16:f9
Index 4
VpGroup Name VPGROUP_4
Status Disabled
WWPNs N/A
In the preceding examples, the second byte from the left (in bold text) denotes the
virtual port group ID, and the right-most byte (in italic text) denotes the physical
Fibre Channel port. In these examples VPGs 1 through 3 have corresponding
virtual ports with 00, 01, and 02 presented out of physical FC ports 0 and 1, with
WWPNs ending in f8 and f9, respectively.
The following example shows the information grouped by physical Fibre Channel
port.
iSR6200 <1> (admin) #> show fc
FC Port Information
---------------------
FC Port 1
Port Status Enabled
Link Status Up
Current Link Rate 4Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:13:16:f8 (VPGROUP_1)
WWPN 21:00:00:c0:dd:13:16:f8 (VPGROUP_1)
Port ID 0a-04-00 (VPGROUP_1)
WWNN 20:01:00:c0:dd:13:16:f8 (VPGROUP_2)
WWPN 21:01:00:c0:dd:13:16:f8 (VPGROUP_2)
Port ID 0a-04-01 (VPGROUP_2)
WWNN 20:02:00:c0:dd:13:16:f8 (VPGROUP_3)
WWPN 21:02:00:c0:dd:13:16:f8 (VPGROUP_3)