Filter
Top Products
7–Removal and Replacement
iSR6200 Chassis Blades
ISR651101-00 G 7-9
>ftp 10.0.0.1
Connected to 10.0.0.1.
220 (vsFTPd 2.0.5)
User (10.0.0.1:(none)):
ftp
331 Please specify the password.
Password:
ftp
230 Login successful.
ftp>
bin
200 Switching to Binary mode.
ftp> put iSR6200_FRU.bin
200 PORT command successful. Consider using PASV.
150 Ok to send data.
226 File receive OK.
ftp: 20010 bytes sent in 0.00Seconds 20010000.00Kbytes/sec.
ftp>
bye
221 Goodbye.
10: Telnet to 10.0.0.1, and run the ‘fru restore’ command.
iSR6200 login:
guest
Password: ****** (default is password)
******************************************************
* *
* iSR6200 *
* *
******************************************************
iSR6200 #>
blade 1
iSR6200 <1> #> admin start
Password : ******
iSR6200 <1> (admin) #> fru restore
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Type of restore (0=full, 1=mappings only) [full]
0