Filter
Top Products
7–Removal and Replacement
Power and Cooling Modules
7-12 ISR651101-00 G
Installing the Replacement PCM
To install a replacement PCM in the iSR6200 chassis:
1. Before you insert the new PCM into the chassis, unlatch the lever on the
new PCM (see Figure 7-11.)
Figure 7-11. Unlatching Lever on New PCM
2. Insert the replacement PCM into the iSR6200 chassis. As shown in
Figure 7-10, push the PCM straight into the chassis (1), and then make sure
the PCM is properly seated into the chassis mid-plane by pushing the lever
up and locking the latch in the up position (2). The PCM fans turn on and the
LED should show an amber color.
Figure 7-12. Inserting the Replacement PCM
(1)
(2)