Filter
Top Products
4–Configuration
Controlling per-Host LUN Access on the iSR6200
4-24 ISR651101-00 G
1 50:06:01:60:c1:e0:0d:a2,50:06:01:68:41:e0:0d:a2
Please select a Target from the list above ('q' to quit): 0
Index (LUN/VpGroup) Vendor
----- ------------- ------
1 1/VPGROUP_1 DGC
2 2/VPGROUP_1 DGC
3 3/VPGROUP_1 DGC
Please select a LUN to present to the initiator ('q' to quit): 1
All attribute values that have been changed will now be saved.
Figure 4-19 shows the effect of mapping an initiator to LUN 1 using the CLI
commands shown in the preceding example.
Figure 4-19. Logging into Target After Mapping LUN 1
You can accomplish the same LUN mapping using the SANsurfer Router
Manager’s Target Presentation/LUN Mapping Wizard.
To map LUN 1 to an initiator using SANsurfer Router Manager:
1. On the Wizards menu, click Presentation Wizard.
2. On the Select the Initiators for the LUN Presentation window, select an
initiator as shown in Figure 4-20, and then click Next.
Host accessible LUNs
Storage Array
21:00:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f8
21:02:00:c0:dd:13:16:f8
21:00:00:c0:dd:13:16:f8
21:00:00:c0:dd:13:16:f9
iSR6200
Blade 1
FC1
FC2
Host Entities
Host Entity 0
21:01:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f9
Host Entity 1
21:02:00:c0:dd:13:16:f8
21:02:00:c0:dd:13:16:f9
Host Entity 2
21:00:00:c0:dd:13:16:f9
21:01:00:c0:dd:13:16:f9
21:02:00:c0:dd:13:16:f9
LUN 1
LUN 2
LUN 3
LUN 4
LUN 5
LUN 6
iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970
iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970
iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970
Log-In
LUN 1