Filter
Top Products
4–Configuration
Enabling Virtual Port Groups
4-4 ISR651101-00 G
Figure 4-2. Chassis Information for Selected VPGROUP
3. Click Save.
4. In the System Check dialog box, type the system password, and then click
OK.
The Set VPGroup message box opens, as shown in Figure 4-3.
Figure 4-3. Set VPGroup Message Box
5. Click OK to close the message box.
To enable or disable a VPGroup using the CLI:
The following example shows how to enable VPGroups 2 and 3 by issuing the CLI
set vpgroups command.
iSR6200 <1> (admin) #> set vpgroups
The following wizard will query for attributes before persisting
and activating the updated mapping in the system configuration.