Regent Sheffield SMV80 Stud Sensor User Manual


 
2
Congratulations. You have purchased a Regent Dusk to Dawn security
wall light. This fixture will provide years of convenience and protection
for your home or business.
How it works
Your Regent Dusk to Dawn security light is an energy efficient outdoor
light. It features a light sensor that automatically turns the light on at
dusk and off at dawn.
What you need
• Standard outdoor coverplate
• Flat head screwdriver
• Adjustable wrench
• Weatherproof silicone caulking
What’s included
• Fixture (A) with glass lens and swivel bolt (B)
• Bulb (C)
• Locknut (D)
• Light sensor reflector (E)
What to know
• For outdoor use only.
• UL and cUL LISTED for wet locations.
• Fixture designed for wall or eave mount to an outlet box only. Install
fixture to outlet box marked for use in wet locations.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any
other connection voids warranty.
• Fixture should be installed by persons with experience in household
wiring or by a qualified electrician. The electrical system, and the
method of electrically connecting the fixture to it, must be in accordance
with the National Electrical Code and local building codes.
• Always use same wattage and type of bulb that was included with the
fixture. Failure to do so will void warranty.
• Your fixture is prewired and preassembled for easy installation.
What to know
What’s included
What you need
How it works
SMV80, CSMV80 (Bronze)
SMV80W, CSMV80W (White)
A
B
C
D
E
SMV80 Series IS. 325-1436.qxd 2/16/04 4:38 PM Page 2