Filter
Top Products
17
Instructions For Disassembly Of The Shotgun
1. Make sure the shotgun is unloaded (FOLLOW UNLOADING INSTRUCTIONS) and pointed in a safe
direction.
2. Make sure the trigger block safety is engaged in the “on” or “safe” position. (See
Picture 30).
3. Remove the fore end from the barrel by pulling out the mechanical lever in the lower center of the fore end
and removing the fore end in a downward outward swinging motion. (See Picture 31). Never force the
fore end off the barrel and receiver.
4. With the barrels and receiver supported with one hand, push the top lever fully to the right and tip the
barrels down until they disengage from the receiver. Check the barrels for damage and obstructions after
removal. (See
Pictures 32A and 32B).
16
Picture 32A Picture 32B
Picture 30
Picture 31