Revolabs 10-FLX2-101-POTS Work Light User Manual


 
18
NOTE: When using the FLX connected through the AUX IN
and AUX OUT to another device, only the FLX speaker can be
used. All other speakers must be switched off. Any Echo
Cancellation provided on the Video Conferencing unit must be
switched off.
NOTE: For security reasons, Microphones will not send any
audio signal to the AUX OUT connector when in the charger.
To receive audio signal on the AUX OUT, microphones have to
be taken out of the Charger Base.
FLX Home Screen
Whenever the FLX is not in a call, the FLX Dialer will
show the FLX Home Screen. If time and date have been
set or received from the network, the screen will show this
information. Otherwise it will be blank.
From the home screen a call can be started, or the system
menu can be entered.
Placing a Telephone Call
1. From the home screen on the FLX Dialer enter the
phone number to be called.
2. Once the number is entered completely, press the
green „call‟ button to initiate the phone call.
3. If any Microphones are out of the Charger Base and
active, the call will default to „speaker mode‟ and
will be identified by the ring tone being played out of
the Speaker.
4. If no Microphones are outside the Charger Base the
call will default to „handset mode‟ and the call will
take place on the FLX Dialer.