Filter
Top Products
23
When the Dialer is removed from the Charger Base no change to call activity will take
place. If there is no active call, the Dialer will revert to the home screen.
Speaker
When the Speaker is placed into the charger during a call the Speaker will reboot and
enter its charging mode. During the reboot the incoming audio from the conference call
will mute until the reboot is complete (approximately 6 seconds). Once the reboot is
complete the audio will resume on the speaker.
When the Speaker is removed from the charger no change to call activity will take
place.
Microphones
When a Microphone is placed into the charger during a call it will automatically reboot,
switch off and enter its charging mode. If all Microphones are placed into the charger
during a speaker call, all Microphones will switch off and the call will automatically
switch to handset mode. To return to a speaker call a Microphone will need to be
manually switched on by pressing the button, and then unmuted by pressing the button
again. The call will need to be switched over to a speaker phone using the dialer. It is
not recommended to use the Microphones in the Charger Base for a speaker call.
If at least one Microphone is outside the charger base active, the Microphone in the
Charger Base cannot be unmuted.
When a Microphone is removed from the charger, it will automatically power on and if
“Start Unmute” is ON, unmute itself. If there is an incoming call when a Microphone is
removed from the charger the call will automatically be answered.