Filter
Top Products
9
FEATURES
KNOW YOUR IMPACT DRIVER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
COUPLER
Quickly and easily change bits without the need for separate
tools.
VARIABLE SPEED SWITCH TRIGGER
The variable speed switch trigger allows the operator to use
one hand to hold the tool and control the speed of the bit.
DIRECTION OF ROTATION SELECTOR
Conveniently located direction of rotation selector allows the
operator to switch rotation direction of the bit. It is also used
to lock the switch trigger for changing bits or transporting
the driver.
MINIMUM REACTIVE TORQUE
This impact driver minimizes the amount of reactive torque
to the operator.
COMPACT DESIGN
The short, compact design of the impact driver allows the
operator to get into tight areas.
BLOWS PER MINUTE
This tool features an impact speed of 0-2,800 Blows Per
Minute (BPM). Blows Per Minute is the number of impacts
per minute.
BIT STORAGE
Bit storage is located on the base of the impact driver for
safe convenient storage of a bit not in use.
ELECTRIC BRAKE
The electric brake will stop the bit rotation after the operator
releases the switch trigger.
CHARGER
The charger has a "key hole" hanging feature for convenient,
space saving storage. Screws should be installed so that
the center distance is 4-1/8 in.
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the tool and any accessories from the
box.
n Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
Impact Driver
Battery Pack
Charger
Bit
Case
Operator's Manual
ASSEMBLY
WARNING:
If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to
do so could result in possible serious personal
injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the tool when assembling parts.