Filter
Top Products
9
FEATURES
KNOW YOUR HAMMER DRILL
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
KEYLESS CHUCK
The hammer drill has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
SWITCH TRIGGER
The hammer drill has a conveniently located variable speed
switch trigger.
SWITCH LOCK
The switch trigger can be locked in the OFF (Center Lock)
position. This feature helps reduce the possibility of accidental
starting when not in use.
TWO SPEED GEAR TRAIN
The hammer drill has a two-speed gear train designed for
drilling or driving at LO (1) or HI (2) speeds. A slide switch
is located on top of your drill to select either LO (1) or HI
(2) speed.
FORWARD/REVERSE SELECTOR (DIRECTION
OF ROTATION SELECTOR)
The hammer drill has a forward/reverse selector located
above the switch trigger.
AUXILIARY HANDLE
This drill is equipped with an auxiliary handle for ease of
operation and to prevent loss of control.
DEPTH GAUGE ROD
A depth gauge rod has been supplied with your hammer drill
to assist in controlling the depth of drilled holes.
BIT STORAGE
When not in use, bits provided with the hammer drill can be
placed in the storage area located on the rear of the motor
housing.
CHARGER
The dual port charger fast-charges two batteries at once. It
is equipped with a fan that brings hot batteries to optimum
charging temperature for more efficient charging and longer
battery life. The charger has a “key hole” hanging feature
for convenient, space saving storage. Screws should be
installed so that center distance is 4-1/8 in.
UNPACKING
n Carefully remove the tool and any accessories from the
box.
n Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
1/2 in. Two Speed Hammer Drill
Charger
Battery Pack (2)
Auxiliary Handle
Depth Gauge Rod
Double-ended Bit
Operator's Manual
ASSEMBLY
WARNING:
If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to
do so could result in possible serious personal
injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the tool when assembling parts.