RIDGID R849 Work Light User Manual


 
13
MAINTENANCE
BATTERIES
The battery pack for this worklight is equipped with nickel-
cadmium rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
The batteries in the battery pack have been designed to
provide maximum trouble-free life. However, like all bat-
teries, they will eventually wear out. Do not disassemble
battery pack and attempt to replace the batteries. Han-
dling of these batteries, especially when wearing rings and
jewelry, could result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
Remove the battery pack from the charger once it is fully
charged and ready for use.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
80°F.
Store battery packs in a “discharged” condition.
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
To preserve natural resources, please
recycle or dispose of batteries
properly.
This product contains nickel-cadmium
batteries. Local, state or federal
laws may prohibit disposal of nickel-
cadmium batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
WARNING:
Upon removal, cover the battery pack’s terminals
with heavy-duty adhesive tape. Do not attempt
to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.