Filter
Top Products
EB4424 Specifi cations Features Includes Weight
14663 Input: 3/8 HP, 5 Amp • Two Machines in One – combines edge belt and spindle sanding in one Sander, bed assembly with 4" x 24" Tool Weight: 40 lbs.
OSC Edge Sander Transmission: RPM 1,725 spindle high performance tool sanding belt, 1/2", 3/4", 1", 1 1/2" and 2"
(no load speed) • Ball Bearing Construction – for smooth operation and long life sanding sleeves with corresponding drums,
FPM 1,350 belt (no load speed) • Oscillating and Rotary Motion – for fast, burn-free fi nishes on edges, drum washers, spacer ring inserts and
Oscillation: 60/min. faces, contours, inside and outside curves operator’s manual
Stroke: 3/4" • Toolless Conversion From Belt to Spindle – changes are quick and easy,
Belt Size: 4" x 24" no tools required
Sanding Sleeves Provided: 1/2", • Table Tilts 0-48º – with detents at most popular angles
3/4", 1", 1 1/2", 2" (0º, 15º, 22.5º, 30º, 45º) to sand bevel edges
Sanding Drums Provided: 3/4", • Completely Outfi tted – includes 4" x 24" belt, all drums and a set of
1", 1 1/2", 2" sleeves so it’s ready to go, right out of the box
• On-Board Accessory Storage – all drums, throat plates, washers and
belt mechanism store neatly on the tool
• User-Friendly Features – Sof-Touch™ knobs, hose adapter with built-in
sawdust collection port, recesses in base for sawhorse mounting
JP0610 Specifi cations Features Includes Cutting Capacities Weight
14668 Input: 1 HP TEFC induction, • 1 HP Heavy-Duty Motor – heavy duty induction motor operates on Jointer, motor, cabinet, Max. Planing Width: Tool Weight: 227 lbs.
6 1/2" Jointer Planer 12/6 Amp, 120/240V 120V or 240V, totally enclosed to prevent sawdust contamination, 2 push blocks, angle 6 1/8" w/Cabinet: 213 lbs.
Cuts per Minute: 15,000 fan cooled for longer life, belt drive delivers smooth consistent power gauge, dust chute, Max. Depth-of-Cut/Pass:
Knives: three, HSS • Heavy Duty, Easy-to-Assemble Construction – rugged cast iron bed adjustment wrenches 1/8"
Knife Adjustment: minimizes vibration, machine ground surfaces for precise jointing/planing, and operator’s manual Rabbet: 1/2"
jack screw(s) sturdy heavy gauge wide stance cabinet with built-in sawdust collection port
Bed Length: 45" and on-board tool storage
• Dual Bevel Fence – with stops at 45°, 90° and 135°
• Convenient Dust Port – quickly slides out of the way when not in use,
provides on-board storage for blade alignment tools
• Versatile Bed/Table – long 45" bed gives greater support to large workpieces,
rabbeting ledge for precise rabbets up to 1/2" deep, adjustable front and rear tables
• User-Friendly Controls – Sof-Touch™ knobs and handle grips for operator
comfort and high visibility, magnifi er depth scale indicator
MS1065LZ Specifi cations Features Includes Cutting Capacities Weight
14628 Input: 120V AC 15 Amp • Exactline™ Laser Alignment System – allows operator to easily align Miter Saw, Exactline™ Baseboard Against Tool Weight: 34 lbs.
10" Laser Compound Miter No Load Speed: 5,500 RPM blade with the cut line laser disc, table Fence: 3 1/2"
Blade Arbor: 5/8" • 15 Amp Motor – heavy duty motor powers through the most diffi cult cuts extension, carbide Baseboard Laying Flat: 6"
Blade Diameter: 10" • Sof-Touch™ Controls – improve comfort and grip tipped blade, dust bag, 90° Cross Cut (nominal):
• Repeat-A-Cut™ Fence – allows user to mark fence for repetitive cuts dust guide, work clamp, 2" x 6" or 4" x 4"
• Front Mounted Clamp – securely holds material in place wrench and operator’s 45° Miter Cut (nominal):
• Extended Bevel and Miter Ranges – 0° to 48° bevel and 0° to 50° miter guide 2" x 4"
capacities accommodate a wide variety of cuts 45° Bevel Cut (nominal):
• Left Side Table Extension – for increased material support 2" x 6"
• Sliding Left Fence – provides support for taller material. Adjusts for bevel cuts
• 2 1/2" Dust Port – provides connection to standard dust collection systems and
wet/dry vacs to help keep work area clean
MS1250LZ1 Specifi cations Features Includes Cutting Capacities Weight
25993 Input: 120V AC 15 Amp • Sof-Touch™ Controls – improves comfort and grip Miter Saw, Exactline™ Crown Molding Laying Tool Weight: 49 lbs.
12" Laser Compound Miter No Load Speed: 4,000 RPM • 15 Amp Motor – heavy duty motor powers through the most diffi cult cuts laser disc, table Flat: 6 1/2"
Blade Arbor: 1" • Exactline™ Laser Alignment System – allows operator to easily align extension, carbide tipped Baseboard Laying Flat:
Blade Diameter: 12" blade with the cut li ne blade, work clamp, dust 7 7/8"
• Front Mounted Clamp – securely holds material in place bag, dust guide, wrench 90° Cross Cut (nominal):
• Extended Bevel and Miter Ranges – 3° to 48° bevel and 0° to 47° miter and operator’s manual 2" x 8" or 4" x 4"
capacities accommodate a wide variety of cuts 45° Miter Cut (nominal):
• Left Side Table Extension – for increased material support 2" x 6"
• Repeat-A-Cut™ Fence – allows user to mark fence for repetitive cuts 45° Bevel Cut (nominal):
• Sliding Left Fence – provides support for taller material. Adjusts for bevel cuts 2" x 8"
• 2 1/2" Dust Port – provides connection to standard dust collection systems and
wet/dry vacs to help keep work area clean
MS1290LZ1 Specifi cations Features Includes Cutting Capacities Weight
25408 Input: 120V AC 15 Amp • Sof-Touch™ Controls – improves comfort and grip Miter Saw, Exactline™ Baseboard Against Tool Weight: 70 lbs.
12"Slide Compound Miter Saw No Load Speeds: 4,000 RPM • Exactline™ Laser Alignment System – allows operator to easily align laser disc, work clamp, Fence: 5 1/2"
Blade Arbor: 1" blade with the cut line carbide tipped blade, Max. Cross Cut: 13 1/2"
Blade Diameter: 12" • Work Clamp – securely holds material in place dust bag, dust guide, 90° Cross Cut (nominal):
• Repeat-A-Cut™ Fence – allows user to mark fence for repetitive cuts wrench and operator’s 2" x 12"or 4" x 4"
• Dual Sliding Fences – adjustable fences on both sides of the blade to manual 45° Miter Cut (nominal):
support taller material 2" x 10"
• Dual Bevel and Extended Miter Range – 0° to 47° dual bevel and 45° Bevel Cut (nominal):
0° to 62° miter capacities accommodate a wide variety of cuts 2" x 12"
• 2 1/2" Dust Port – provides connection to standard dust collection systems
and wet/dry vacs to help keep work area clean
• 15 Amp Motor – heavy duty motor powers through the most diffi cult cuts