Filter
Top Products
8. "HOW-TO" MAINTENANCE
16
INSPECTING THE SPARK
PLUG
Clean off carbon deposits on the spark
plug electrode using a plug cleaner or
wire brush.
Check electrode gap.
Adjust gap to : 0.03 inches
(0.7mm to 0.8mm)
Use a proper spark plug :
NGK BPR6ES
0.03 in
(0.7 to 0.8 mm)
ENGINE OIL CHANGE
Initial oil change
After 20 hours of operation
Thereafter
Every 50 hours of operation
1. When changing oil, stop the engine
and loosen the drain plug.
2. Re-install the drain plug before refilling
oil.
3. Refer to the recommended oil table on
page 5.
4. Always use the best grade and clean
oil. Contaminated oil, poor quality oil
and shortage of oil cause damage to
engine or shorten the engine life.
OIL CAPACITY : 1.55 liter
Oil drain plug
(On both side)
Oil filler cap