Filter
Top Products
Page 8
FEATURES – BGH615
SAFETY SHIELD AND SPARK DEFLECTOR
The safety shields and spark deflectors are adjustable for
operator convenience. Operating the grinder without these
features attached could result in serious injury. Do not grind
with the safety shield raised; always wear safety glasses for
personal protection.
WORK REST
The work rests are independently adjustable to com-
pensate for wheel wear. Before grinding, make certain
the work rests are adjusted properly. Generally the object
being ground is done slightly above center of the grinding
wheel.
Adjust the distance between the wheel and the work rest
to maintain 1/16 in. or less separation as the diameter of
the wheel decreases with use.
WORKLIGHT
Your BGH615 Bench Grinder comes equipped with a per-
manently mounted worklight that lights the work area for
safer, more accurate grinding and sharpening. (Requires a
40 watt bulb – not included.)
KNOW YOUR BENCH GRINDER
See Figure 3a.
Before attempting to use your new tool, familiarize your-
self with all operating features and safety requirements.
Carefully read this operator’s manual before using your
grinder.
ON/OFF SWITCH
Your BGH615 Bench Grinder features a front access On/
Off switch for convenience and safety.
MOTOR
Powered by a precision-built electric induction motor, your
bench grinder has sufficient power to handle tough grind-
ing jobs.
GRINDING WHEEL
Equipped with course and fine grinding wheels to suit
most applications.
Note: New wheels sometimes require dressing to true up
the face of the wheel.
WORKLIGHT
SHIELD RODS
(RIGHT AND LEFT)
SPARK
DEFLECTOR
(RIGHT)
WORK REST
(RIGHT)
SAFETY
SHIELD(S)
WHEEL
GUARD
WORKLIGHT
SWITCH
OFF
ON
SWITCH
SPARK
DEFLECTOR
(LEFT)
WORK REST
(LEFT)
Fig. 3a
MODEL BGH615