Filter
Top Products
9
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
OPERATION
WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
PACKING LIST
5-1/2 in. Corner Cat
®
Compact Finish Sander
60-grit Sanding Sheet (2)
120-grit Sanding Sheet (3)
240-grit Sanding Sheet (2)
Heavy-duty Scrubbing Pad (Red)
Light Scrubbing Pad (White)
Polishing Pad (Gray)
Dust Bag
Paper Punch
Carrying Case
Operator’s Manual
Warranty Registration Card
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to hee this warning
could result in possible serious personal injury.
APPLICATIONS
You may use this tool for the purposes listed below:
n Sanding on wood surfaces.
n Removing rust from and sanding steel surfaces.
n Polishing and scrubbing porcelain and metal.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
SANDING SHEET SELECTION
Selecting the correct size grit and type sanding sheet is an
important step in achieving a high quality finish. Aluminum
oxide, silicon carbide, and other synthetic abrasives are best
for power sanding. Natural abrasives, such as flint and garnet
are too soft for economical use in power sanding.
In general, coarse grit will remove the most material and finer
grit will produce the best finish in all sanding operations. The
condition of the surface to be sanded will determine which
grit will do the job. If the surface is rough, start with a coarse
grit and sand until the surface is uniform. Medium grit may
then be used to remove scratches left by the coarser grit and
finer grit used for finishing of the surface. Always continue
sanding with each grit until surface is uniform.
Sheet/Pad Recommended Use
Heavy scrubbing pad Paint and rust removal
(Part no. CFS1501-36)
Light scrubbing pad Light scrubbing and cleaning
(Part no. CFS1501-37)
Polishing pad Polishing
(Part no. CFS1501-38)
60-grit sanding sheet Coarse sanding
(Part no. CFS1501-33)
120-grit sanding sheet Light sanding
(Part no. CFS1501-34)
240-grit sanding sheet Finish sanding
(Part no. CFS1501-35)
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating power tools. Failure to do so
could result in objects being thrown into your eyes
resulting in possible serious injury.