8 9
FEATURES
KNOW YOUR CORNER CAT™ FINISH
SANDER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
ON (I) / OFF (O) SWITCH
The ON (I) / OFF (O) slide switch is located on the front of
the tool.
ORBITAL SANDING ACTION
The oscillating action of your sander produces a very quick,
small circular motion of the sanding pad. The motion is ideal
for producing a fine finished grain or, when using the scrub-
bing pad, removing light rust, paint and other build up from
the work surface.
QUICK CHANGE HOOK-AND-LOOP PAD
The hook-and-loop design allows for quick change of sand-
ing sheets and scrubbing pads. It also enables you to easily
clean and reuse them.
TRI-FLEX PAD DESIGN
The top two-thirds of each sanding pad is a detachable
triangle that can be rotated to extend pad life and promote
even wear.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Corner Cat™ Finish Sander
60-grit Sanding Sheet (1)
120-grit Sanding Sheet (1)
240-grit Sanding Sheet (1)
Heavy-duty Scrubbing Pad (Red) (1)
Light Scrubbing Pad (White) (1)
Polishing Pad (Gray) (1)
Lanyard (not included in combo)
Operator’s Manual
Warranty Registration Card
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.