Filter
Top Products
11
OPERATION
CAUTION:
When placing battery pack in the tool, be sure raised
rib on battery pack aligns with the slot in the buffer/pol-
isher and latches into place properly. Improper installa-
tion of the battery pack can cause damage to internal
components.
TO REMOVE BATTERY PACK
See Figure 4.
Place the power switch in the OFF ( O ) position.
Locate latches on side of battery pack and depress both
sides to release battery pack.
Remove battery pack from the tool.
WARNING:
Battery tools are always in operating condition. Therefore,
switch should always be in the OFF ( O ) position when
not in use or carrying at your side.
PREPARE THE SURFACE
For best results, the surface should be clean and dry. Most
high-gloss surfaces can be cleaned with a mild soap and
water solution. For removal of stubborn dirt such as road
tar, grease, and bug stains, you can use a mild ammonia
solution such as that used in glass cleaners. Before using
any cleaning product, check the label for recommended
applications and follow the directions for use.
Never apply cleaner directly onto surface to be polished.
Apply to a clean cloth then use the cloth to clean the surface.
Do not use any type of abrasive cleanser as it may damage
or scratch the surface.
WARNING:
The drawstring must be tucked securely inside the bon-
net before turning the buffer/polisher on. Failure to do
so could result in the drawstring being caught between
the motor housing and orbiting pad, increasing the risk
of serious personal injury.
INSTALLING/REMOVING APPLICATION
BONNET
See Figure 5.
Place the power switch in the OFF ( O ) position.
Remove battery pack from the tool.
Slip application bonnet edges over pad.
Tie bonnet strings securely.
To remove, untie bonnet strings and pull bonnet edges
over and off pad.
Fig. 4
BATTERY
PACK
LATCHES
DEPRESS LATCHES TO
RELEASE BATTERY PACK
Fig. 5
PULL POLISHING
BONNET EDGES OVER PAD TO INSTALL
TIE STRINGS SECURELY
AND TUCK LOOSE ENDS
UNDERNEATH PAD
APPLYING POLISH TO THE APPLICATION
BONNET
Most polishes are either in paste or liquid form. Before using
any polish, read all directions on appropriate applications
and proper use.