Ryobi RS280VS Sander User Manual


 
6
SPECIFICATIONS
UNPACKING
INSTRUCTIONS
Your sander has been shipped completely assembled.
Carefully remove the tool and accessories from the
box. Make sure that all items listed in the packing
list are included.
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
APPLICATIONS
You may use your sander for the purposes listed below:
Sanding wood surfaces.
Sanding steel surfaces.
Removing rust from steel surfaces.
Sanding Disc Diameter 5 in. (12.7 cm)
Motion Random Orbit
Orbit Diameter 3/32 in. (2.4 mm)
No Load Speed 7,000 - 12,000 Orbits/Min.
Input 120 Volts, 60 Hz, AC only, 2.8 amps
Net Weight 3-1/2 lbs. (1.6 kg.)
PACKING LIST
Random Orbit Sander
Sandpaper (3 sheets)
Conversion Pad
Operator’s Manual
WARNING:
If any parts are missing do not operate your tool until
the missing parts are replaced. Failure to do so
could result in possible serious personal injury.