Filter
Top Products
8
FEATURES
Fig. 1
PAPER PUNCH
TAB
lEvER
CUSHION
ON/Off
SWITCH
TO
TURN Off
PAPER ClAMP
dUST BAg
PRODUCT SPECIFICATIONS
Size of Paper ...........................................................................................................................................................1/4 Sheet
Motion .............................................................................................................................................................. Orbital Action
Orbit Diameter ............................................................................................................................................................ 1/16 in.
No Load Speed ...................................................................................................................................... 14,000 r/min. (RPM)
Input ....................................................................................................................................120 V, AC only, 60 Hz, 2.0 Amps
KNOW YOUR SANDER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
DUST BAG
Your sander has a built-in dust collection system that col-
lects dust through punched holes in the sandpaper and
cushion.
GRIPZONE
™
OVERMOLD TECHNOLOGY
The sander features Gripzone
™
overmold technology for
improved comfort with a positive grip.
LIVE TOOL INDICATOR
The live tool indicator is located on the handle of the
sander and indicates that the tool is connected to a power
supply.
ON/OFF SWITCH
This tool is equipped with a simple switch control. To turn the
sander ON, slide the switch to the left ( l ). Slide the switch
to the right ( O ) to turn the sander OFF.
PAPER CLAMPS
Your sander has quick action paper clamps. This makes
changing or replacing sandpaper fast and easy.
PAPER PUNCH
Dustless sanding occurs when you use the paper punch to
punch holes in the sandpaper prior to sanding.
lIvE TOOl INdICATOR
TO
TURN ON