Filter
Top Products
Page 7
DRILL-DRIVER SA60 SA720
Chuck 3/8 in. (10 mm) Keyless 3/8 in. (10 mm) Keyless
Motor DC Motor 6.0 Volt DC Motor 7.2 Volt
Switch Two Speed Two Speed
No Load Speed 300 / 500 RPM 330 / 500 RPM
Clutch 24 Positions 24 Positions
Charger Input 120 V, 60 Hz, AC only 120 V, 60 Hz, AC only
Charge Rate 3-6 Hours 3-6 Hours
Torque Maximum 45 in.lb. Maximum 50 in.lb.
INSTRUCTIONS
When unpacking the tool:
■ Carefully remove the tool and accessories from the box.
■ Make sure that all items listed in the packing list are in-
cluded.
■ Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
■ Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
■ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Cordless Drill
Charger (Model SA720 only)
Battery Pack (Model SA720 only)
Operator’s Manual
Case (Model SA720 only)
WARNING:
If any parts are missing do not operate the tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
You may use the two speed drill for the purposes listed below:
■ Drilling in wood
■ Drilling in ceramics, plastics, fiberglass, and laminates
■ Drilling in both hard and soft metals
■ Using driving accessories, such as driving screws with screwdriver bits
■ Mixing paints
UNPACKING
APPLICATIONS
SPECIFICATIONS