Filter
Top Products
page 3
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a
MILWAUKEE
service facility for a free
replacement.
2. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
3. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
4. Keep hands away from all cutting edges and moving parts.
5. Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.
FUNCTIONAL DESCRIPTION
No Load Blows
per Minute
Low 0 - 6 500
High 0 - 20 800
Low 0 - 6 500
High 0 - 20 800
Catalog
No.
0523-20
0524-20
Volts
DC
18
18
Specifications
No Load
RPM
Low 0 - 500
High 0 - 1 600
Low 0 - 500
High 0 - 1 600
Symbology
Volts Direct Current
No Load Revolutions per
Minute (RPM)
Properly Recycle Nickel
Cadmium Batteries
Underwriters Laboratories, Inc.
Canadian Standards Association
Capacities
Steel
1/2"
1/2"
Wood
1-1/2"
1-1/2"
Masonry
3/8"
3/8"
1. Clutch/Hammer-Drill selector collar
2. Speed selector
3. Release buttons
4. Battery pack
5. Trigger
6. Control switch
7. Keyless chuck
Cat. No. 0523-20
Cat. No. 0524-20
1
2
3
4
5
6
7
1
2
3
6
7
5
4