Filter
Top Products
8
Dry Cell Compatible Twicell
High Capacity and Convenience
Features
Dry cell compatible shape
Dry cell compatible Twicell can be used for most of equipment
using AA and AAA size dry cells.
Top level capacity in retail use rechargeable battery.
The equipment which need the high capacity like the digital camera
is suitable.
Long charge/dischargecycle life as well as offering
outstanding economy
Twicell can reduce waste (the amount of used batteries) than that
of dry cell.
A powerful range
PTC
*1
embedded model for toy uses and I-C3 system
*2
embedded
model for very rapid charging are newly developed.
*1 PTC(Positive Temperature Coefficient) :
Thermal protect device, it restrains current in case of external short circuit.
*2 I-C3 (In-cell-charge-control) system :
The system which has a pressure control mechanism developed by Rayovac Corporation.
Use
For digital cameras, PDA and audio equipment, etc.
Features
NC-MQR02N can charge AA/AAA size Nickel-Metal Hydride
batteries at a time.
AA size Nickel-Metal Hydride batteries (HR-3U, Typ.2500mAh type)
: approx. 280min.(four batteries), approx.125min.(two batteries)
AAA size Nickel-Metal Hydride batteries (HR-4U, Typ.900mAh type)
: approx. 185min.(two batteries)
Newly developed control systems prevent the battery
from overcharging and charging error.
Newly developed peak detection and pulse control systems prevent the
battery from overcharging and charging error. And the light informs the
charging status.
Light weight and compact design.
NC-MQR02N is handy to carry. Weight : approx.95g (except the batteries),
Thickness : 27.5mm. And they have the storage space of plug.
Portable charger which can charge
AA/AAA size batteries at a time quickly
and have auto voltage function for
AC100V-240V
The charger for
Nickel-Metal Hydride batteries
NC-MQR02N
Cylindrical type
(approx.g)
1 2
Current(mA) Diameter(D) Height(H)
Model No.
Voltage
Minimum Capacity
Quick-Charge
Weight
Notes
NEW
NEW
NEW
UP
UP
1 Average capacity when a single cell is discharged at 0.2It after being charged at 0.1It for 16 hours. 2 Minimum capacity when a single cell is discharged at 0.2It after being charged at 0.1It for 16 hours.
3 Consult Sanyo according to conditions of use. 4 Including tube. 5 Need specific charging system. 6 Recommend low-rate charging shown in the rating.