• 7 •
Attach the Foot:9.2 Remove the charger from the packing materials and place it
upsidedownonaatsurface.Attachthefootandsecureitwiththefour¼-20
thread cutting screws provided.
Assemble the Wheels and Axle9.3 :Holdtheaxleuprightontheoororwork
surface. Then, using a hammer, tap one of the axle caps onto the top end of
the axle. Be sure to tap the axle cap on straight. Slide both wheels onto the
axle with the recessed hubs facing out as shown. Install the second axle cap.