Filter
Top Products
• 8 •
Mount the Axle to the Charger10.4 : Place one end of each bracket into the
slot on the bottom of the charger. Place the axle assembly under each
bracket. Attach the brackets using the two, 10-32 thread cutting screws
provided.
NOTE: Be careful not to drop the brackets inside of the charger case.
Attach the Handle10.5 : Turn the charger right side up onto its foot and
wheels. Remove the two top screws from each side of the charger. Insert
theberglasscliprodintothepiercedholesontheinsideofthehandle.
Align the handle so the screw holes are aligned with the screw holes on
each side of the charger. Attach the handle using the same screws you
previously removed.
Charger assembly is now complete. Battery clips can be clamped to the 10.6
berglassrodforconvenientstorage.