Troubleshooting
26
PROBLEM
LED indicators
illuminate in an
erratic manner not
explained in the
“Operating Fea
-
tures” section.
The CHECK (red)
LED is flashing.
POSSIBLE CAUSE
A button may have
been pressed while
the Battery Manager
was plugged in.
The Battery
Manager may be
defective.
Battery Manager
is in abort mode.
Battery may be
defective.
Battery type may
have been set for 6
volts on a 12-volt
battery.
SOLUTION
Make sure noth-
ing is touching the
control panel, then
unplug the unit
and plug it in again.
Return to place
of purchase for
replacement.
See “Operating
Features.”
Unplug the Battery
Manager and select
the correct battery
voltage.
26
SI263 IM 0205v1.indd 26 3/2/05 4:41:09 PM