Schumacher SP1 Battery Charger User Manual


  Open as PDF
of 43
 
•8•
GROUNDING AND AC POWER CORD CONNECTIONS8.
RISK OF ELECTRIC SHOCK OR FIRE.
This battery charger is for use on a 8.1
nominal 120-volt circuit. The plug must
be plugged into an outlet that is properly
installed and grounded in accordance
with all local codes and ordinances. The
plugpinsmusttthereceptacle(outlet).Donotusewithan
ungrounded system.
8.2 Never alter the AC cord or plug provided – if it
doesnotttheoutlet,haveapropergroundedoutletinstalledby
aqualiedelectrician.Animproperconnectioncanresultinarisk
of an electric shock or electrocution. NOTE: Pursuant to Canadian
Regulations, use of an adapter plug is not allowed in Canada.
Use of an adapter plug in the United States is not recommended
and should not be used.
Recommended minimum AWG size for extension cord:8.3
100 feet (30.5 meters) long or less - use an 18 gauge (0.82 •
mm
2
) extension cord.
Over 100 feet (30.5 meters) long - use a 16 gauge (1.31 mm•
2
)
extension cord.
FEATURES9.
Battery Status LED’s1.
12V Plug Cable 2.
Assembly
Ring Terminal Cable 3.
Assembly
Battery Clip Cable 4.
Assembly
Charger Quick-5.
Connect Cable
1
2
3
4
5
 previous next