Filter
Top Products
TROUBLE SHOOTING CHART
TROUBLE
Woodstrikes outfeed
tableafter passingover
cutterhead
Rippleson planedsurface.
Planedsurface notstraight.
Excessivegouging at endof cut.
90° and 45" cuts inaccurate
Cutterguard does not
function properly.
Chipdischarge clogs
Cutterslows down
during operation
PROBABLECAUSE
1. Bladesimproperly adjusted below
surfaceof outfeedtable.
2. Infeedtable out ofadjustment
1. Oneblade set higherthan other.
2. Dullblades.
3. Boardnot heldfirmly againstfenceor
outfeed table
1. Infeedtable looseor out of adjustment.
,2. Bladesset too low.
1. Bladesset toohighaboveoutfeedtable.
1. Fenceand tilt indicators notadjusted
properly.
1. Returnspring broken, or spring
hasbeenweakened.
1. Obstructionreducingair flow.
2. Cutterheadspeedtooslow.
3. Woodhashigh moisturecontent.
1. Workfeed speedtoofast.
2.
Attempting to remove too much material
REMEDY
1. Re-adjustblades.
2. Contact your nearest Sears store
or service center.
1. Re-adjust blades
2. Re-sharpen or replace.
3: Hold board firmly against fence and
outfeed table.
1. Adjust infeed table, see Maintenance
section.
2. Re-adjust blades.
1. Reset blades.
1. Re-adjust fence, see Assembly
section.
1. Replace spring immediately. Contact
your nearest Sears store or service
center.
1. Remove obstruction.
2. Decrease feed speed.
3. Decrease feed speed.
1. Decrease feed speed.
2. Decrease depth of cut, make
two or more cuts.
owners
manual
Service
MODELNO.
149.236320
How To Order
Repair Parts
S_FARS/ CRRFT$M RN
51/8-INCH JOINTER-PLANER
Now that you have purchased your Jointer-Planer, should a need ever exist for
repair parts or service, simply contact any Sears Service Center and most Sears,
Roebuck and Co. stores. Be sure to provide all pertinent facts when you call or
visit.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
• PART NUMBER • PART DESCRIPTION
• MODEL NUMBER:
149.236320
• NAME OF ITEM: 5-118 INCH
JOINTER--PLANER
All parts listed may be ordered from any Sears Service Center and most Sears stores.
If the parts you need are not stocked locally, your order will be electronically
transmitted to a Sears Repair Parts Distribution Center for handling.
SEARS, ROEBUCK AND CO., Dept. 698/731A, Sears Tower, Chicago, IL 60684
Printed in U.S.A.