Sears 200.71219 Battery Charger User Manual


 
9
A minimal amount of care can keep your battery charger working properly for years.
1. Clean the clamps each time you are nished charging. Avoid skin contact with bat-
tery acid. See “Personal Safety Precautions”, page 4.
2. Coil the input and output cords neatly when storing the charger. This will help pre-
vent accidental damage to the cords and charger. Avoid skin contact with battery
acid. See “Personal Safety Precautions”, page 4.
3. Occasional cleaning of the case of the charger with a soft cloth will keep the nish
shiny and help prevent corrosion.
4. Store the battery charger in a clean and dry location.
MAINTENANCE AND CARE
This charger adjusts the charging time in order to charge the battery completely, ef-
ciently and safely.
This battery charger has a rated output of 2 and 4 ampere. This output will vary with
the age and condition of the battery being charged. If battery has only been slightly
discharged, it can be charged in less than a few hours. The same battery will take
longer to charge if it is very weak.
CHARGING TIMES
BATTERY PERCENT AND CHARGE TIME
Battery Condition
2 Amp, 12 Volt Battery 50% Discharged 100% Discharged
Ampere Hour Battery Capacity Approximate Average Charge Time In Hours
10 3.2 6.2
12 4.0 7.5
20 6.4 12.4
Battery Condition
4 Amp, 6 Volt Battery 50% Discharged 100% Discharged
Ampere Hour Battery Capacity Approximate Average Charge Time In Hours
10 1.6 3.2
12 2.0 4.0
20 3.2 6.4