Filter
Top Products
Charge Time Needed if Amp-Hours is Known
• Find the Charge Factor for your battery in the table on page 11.
• Multiply by the Amp-Hour rating of the battery.
• Divide by the Charger Setting (either 2 Amp or 10 Amp.)
• Multiply by 1.25 to get the approximate Hours Neededto bring the battery to full
charge.
Example: 15 Amp-Hour (AH) Battery, 50% State-of-Charge,
2 Amp Charger Setting
[(AH x Charge Factor) + Charger Setting] x 1.25 = Hours Needed
(15 x 0.5 + 2) x 1.25 = 4.7 Hours
Charge Time Needed if Reserve Capacity is Known
• Find the Charge Factor for your battery in the table on page 11.
• Multiply the Reserve Capacity rating of the battery.
• Divide by the Charger Setting (either 2 Amp or 10 Amp).
• Multiply by 0.73 to get the approximate Hours Needed to bring the battery to full
charge.
Example: 95-Minute Reserve Capacity (RC) Battery, 25%
State-of-Charge, 10 Amp charger Setting
[(RC x Charge Factor) + Charger Setting] x 0.73 = Hours Needed
[(95 x 0.75) + 10] x 0.73 = 5.2 Hours
To keep your battery charger working properly for years:
,
Clean the clamps each time you
are finished charging. Wipe off any
battery fluid that may have come in
contact with the clamps to prevent
corrosion.
.
Coil the input and output cords
neatly when storing the charger.
This will help prevent accidental
damage to the cords and charger.
12