Filter
Top Products
Controls
Control
Guard Clamp
Screw
Guard
llold Down
Knob
tlokt Down
Riving Knife
Bracket
Function
Secures guard to motor; frees
guard for removal
Protects against contact with
upper blade; partially protects
against contact with lower'
blade; acts as sawdust deflector'
Frees hold down to move up
and down; locks hold down in
place
During ripping, acts as partial
barrier' to infeed side of blade;
keeps infeed side of workpiece
from fluttering; acts as sawdust
deflector
Prevents side to side movement
of riving knife and provides
means for' adjusting alignment
Qoeration/Comm_nts
Turn counterclockwise to
loosen, clockwise to tighten
Upper part remains fixed in
level position. Notch in guard
fits securely into matching tab
on motor
Clear guard is moveable: raise
over fence at start of crosscut;
See Saw Handle; most work-
pieces will automatically raise
clear guard during ripping; See
Guard Tab
Turn counterclockwise to
loosen, clockwise to tighten
For ripping, lower hold down to
top of workpiece surface, then
raise slightly zmd lock in place.
For crosscutting lock in fully
raised position
Loosen to align riving knife,
then tighten
14